S&G Engineering Solution Lmt.
S&G, CREATE A BETTER FUTURE WITH YOU
Add to Cart
Sandwich Panel Production Line for Garage doors,Continuous line for industrial & residential sectional doors production
The plant is able to produce doors with adjustable widths from 366 mm to 800 mm, with industrial and residential joints.
Here following the main final goals:
| Material | Raw material | colored steel plate, galvanized plate, or aluminum plate |
| Thickness | 0.3-0.8 mm (As customer`s need) | |
| Feeding width | 300mm-1250mm (According to customer`s profile) | |
| Material hardness: | 550 Mpa---350 Mpa | |
| Hydraulic Uncoiler | Inner Diameter | 510-610mm |
| Max Coil width | 1250mm | |
| Capacity | 10T/8T | |
| Hydraulic cylinder lift stroke | Up panel 0.5m, Down panel 0.5m | |
| Coil car stroke | 2.5m | |
| Pressure of hydraulic system | 6.3Mpa | |
| Main Forming | Forming steps | 24 stations ( Depend on Profiles ) |
| Shaft diameter | Φ60mm | |
| Design type | Middle plate welded | |
| Transmission | Gear box (Chain and gear box depend on thickness and customer`s need) | |
| Machine frame | 350# H steel welded; Steel plate welded/ Memorial arch frame type | |
| Roller material | Gcr15MoV | |
| Shaft material | 45# steel with tempering | |
| Cutting blade material | Gcr12MoV quenched | |
| Working speed | 12-15m/min | |
| Power of machine | 260KW (According to the thickness) | |
| Type of cutting | Hydraulic | |
| Cutting tolerance | ±1mm | |
| Material of blades | Gcr12 quenched | |
| Cutter quantity | 1 set | |
| Working pressure | 20MPA | |
| Pre-heating Room | Temperature sensor | Hot couple |
| Temperature adjustment | Automatic control by temperature control equipment | |
| Hot air motor | 18.5Kw | |
| Hot air heater | 200Kw | |
| Heat type | Heated by electricity and air circulate | |
| Flying Saw Cutting Machine | Outline dimension of band saw cutting machine | 5500mmx5000mmx 3000mm |
| Run speed of band saw | 1000-1500rpm | |
| Rotate diameter of band saw | 550mm | |
| Cutting speed of band saw | 50m/min-1000m/min | |
| Width of band saw | 30mm | |
| Length of band saw | 3000mm-4000mm | |
| Transverse move distance | 1500mm | |
| Cut length on line | 3000mm | |
| Configurations | Uncoiling→ (Perforation machine )→Feeding material into machine→ Roll forming→ PU foaming→ Pre-heating Room→ Auto cutting→ Products receiving | |
|
| ||
| Other Spare part | Weight | About 25 ton |
| Dimension | 42000mm * 3600mm * 3300mm | |
| Main body color | As required | |
| Voltage | 380v/50hz/3ph(or as required) | |
| Suitable working temperature | About 25℃ | |
| Spare cutting blade | One piece | |
| Fuse | 2 pieces | |
| Relay | 2 pieces | |
| Travel switch | 2 pieces | |
| Solenoid valve | 1 pieces |
Features of EPS Panels
1. Energy saving
You can save air-conditioning and heating expenses remarkably, thanks to its excellent insulation effect as mush as 4. 2 times of cement brick.
2. Perfectly insulated and waterproof
Using the high-density EPS, it is moisture and noise free.
3. Semi-permanence and easy installation
Using galvanized steel sheets treated with fluorine and silicone on the surface, it is unchangeable and semi-permanent. Due to the standardized products, you can save the cost for construction by hiring the least number of workers and minimizing the period of construction.
4. Excellent lightness and firmness
It is light but firm, so even a house is simply built, it is strong enough. Coating with different material, you can enjoy various type of panels.
Specifications:
Power supply: AC380/50-60HZ
Total power: 32KW
Production line speed: 4-8m/min
Equipment overall dimensions: 45000x2600x2800
Product width: 1000mm 1200mm
Product thickness: 50-300mm
Annual output: 600 thousand square meters
Pu Sandwich Panel Picture:
Machine Picture: