S&G Engineering Solution Lmt.
S&G, CREATE A BETTER FUTURE WITH YOU
Add to Cart
206.3KW Power Steel Coil Slitting Machine Hr Slitting Line With Scrap Winder,Slitting precision:Width tolerance ±0.1mm
Sheet Metal Slitting Machine description and specification
Vertical slitting machine for slitting line is named with S&G code with workstations for uncoiling, slitting cut and rolling. It consists of feeding trolley, assisting support, decoiler, pincher, straigntener, slitting cutter, edging machine, tensional machine, recoiler machine, and downloading equipment, hydraulic system and so on. The whole line is controlled by PLC with computer display. We mainly apply computer-control system of brands Mitsubishi, Yaskawa, Siemens, Baumueller, Delta, and Schneider. This line can help to improve efficiency, lower cost and ensure quality. KJS has won wide market with its high performance and low price. The thickness of material can be from 6MM to 25MM, width from 600MM to 2500MM, quantity from 6 to 30 pieces, highest precision ±0.05MM and speed 200M/min. This line is applicable for processing of copper, aluminum, cold-reduced material, hot rolled material, silicon steel, and stainless steel and so on.
Composed devices
1. Hydraulic entry coil
2. de-coiler integration machine
3. Press and pinch device
4. Hydraulic cutting machine
5. Looper I
6. Side guide device
7. Slitting machine
8. Scrap winder
9. Looper II
10. Tension stand
11. Hydraulic unload- Recoiler integration machine
12. Electric control system
13. Hydraulic system
| Technical data for S&G180 series | ||||||
| model | thickness(mm) | width(mm) | slit number PCS | Accuracy (mm) | Speed (m/min) | weight (t) |
| S&G180-1*650 | 0.2-1 | 150-650 | 30-8 | 0.05 | 0-180 | 3,5 |
| S&G180-1*850 | 0.2-1 | 300-850 | 30-8 | 0.05 | 0-180 | 5,10 |
| S&G180-1*1050 | 0.2-1 | 300-1050 | 30-8 | 0.05 | 0-180 | 5,10 |
| S&G180-1*1300 | 0.2-1 | 400-1300 | 30-8 | 0.05 | 0-180 | 10,15 |
| S&G180-2*650 | 0.3-2 | 150-650 | 30-8 | 0.05 | 0-180 | 3,5 |
| S&G180-2*850 | 0.3-2 | 300-850 | 30-8 | 0.05 | 0-180 | 5,10 |
| S&G180-2*1050 | 0.3-2 | 300-1050 | 30-8 | 0.05 | 0-180 | 5,10 |
| S&G180-2*1300 | 0.3-2 | 400-1300 | 30-8 | 0.05 | 0-180 | 10,15 |
| S&G180-2*1600 | 0.3-2 | 400-1600 | 30-8 | 0.05 | 0-180 | 15,20 |
| S&G180-2*2000 | 0.3-2 | 500-2000 | 30-8 | 0.05 | 0-180 | 15,20 |
| S&G180-3*1300 | 0.4-3 | 400-1300 | 30-6 | 0.05 | 0-180 | 10,15 |
| S&G180-3*1600 | 0.4-3 | 400-1600 | 30-6 | 0.05 | 0-180 | 15,20 |
Specifications:
| Raw material parameters | Raw material | GI. |
| Thickness | 6-25mm | |
| Feeding width | 300-1800mm | |
| Effective width | As per your profile | |
| Inner Diameter | φ508mm | |
| Max Coil width | ≤φ1800mm | |
| Capacity | 30T | |
| Equipment parameters | Material of pre-leveling roll: | 42CrMo, Diameter: φ180mm；mid-frequency Quenching , Hardness: HRC56-60 |
| Strip :width: | ≥50mm； | |
| Slitting precision: | Width tolerance ±0.1mm； | |
| Slitting pieces: | 0.5mm plate≤15pcs；3mm plate≤10pcs； | |
| Material of tool shaft: | φ200mm；Material 42CrMo; | |
| Blade specifications: | φ3100×φ200×15mm；(prepared by users) | |
| Blade material: | 6CrW2Si, Hardness HRC 56-60; | |
| Recoiling speed: | 0-60m/min; | |
| Recoiling ID: | φ508mm； | |
| The standard height of the production line: | 900mm; | |
| Main electric | Using power | 380V±10% three-phased electricity, 50Hz |
| Control voltage: | 220V±10% | |
| Electric control cabinet: | IP40 | |
| Gross installed capacity: | 206.3kw | |
| Using environment: | Temperature: | -5-45° |
| Humidity: | 20-85%PH(without dew) | |
| Sea level: | Under 1000m | |
| Strength of earthquake: | 6 magnitude | |
| Craftsman parameters of the line: | Feeding direction: | From operator’s side from right to left |
| Number of operators: | 3-5 people | |
| The color of the line: | It could be decided by the buyer. | |
| configurations | Carry coil→ load coil → decoil (→press-guide& shovel-head) → opener→ pinching →head cutting → looping & storage →transition→ guide→ slitting →transition(→scrap rewinding)→ looping & storage → pre-separation, damping, press-separation → recoiling→ packing→ discharging (electric control system, hydraulic system) | |
FAQ:
Q: Can you make the machine according to my design or proto type?
A: Yes. We have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us
Q: How can we be assured that you will deliver us quality machine with spare parts?
A: 1. Customers to send the technical people to our factory for checking the quality.
2. We can send the technicians to the buyer`s factory for the installation of the machine.
3. Good aftersales-service, it's free of charge during the warranty period
Production Line:
Machine Picture: